Elegant design with clear lines in the limited NVIDIA edition
Huge side window made of tinted hard glass with "NVIDIA GeForce GTX" lettering
Green Illuminated I / O Panel & IN WIN Logo
Excellent workmanship & high quality materials
Vertical mounting of the top fan or the radiator
Space for mainboards with E-ATX, ATX, Micro-ATX or Mini-ITX form factors
I / O panel with 2x USB 3.0, 2x USB 2.0 and HD audio connectors
Sufficient space for a strong air or water cooling
2x 3.5 inch & 2x 2.5 inch drive slots available
InWin 303 Nvidia Edition ATX Mid Tower Glass Case
Timelessly elegant design with huge hard-glass side
window
The IN WIN 303 in the limited NVIDIA Edition combines modern
optics with a elegant aesthetic. It is mainly made of high-quality, 1.2 mm
thick steel and impresses especially through its huge side window made of
tinted hard glass with "NVIDIA GeForce GTX" -letter. Innovative
as IN WIN, the 3 mm thick side window can be opened completely without tools by
a kind of handle on the upper edge. Clear advantage! The clear front
of the black housing is interrupted only by the stylish I / O panel (2x USB
3.0, 2x USB 2.0, power button, HD audio), the "IN WIN" logo and the
NVIDIA logo. A special feature of the NVIDIA edition is, of course, the
green illumination of the logo and the individual ports, which again benefits
the look and looks especially cool in the dark.
Of course the black interior also holds some surprises. For example, the
power supply is installed at the upper end of the housing and is located behind
an air-permeable cover in honeycomb optics. As a result, the mainboard is
mounted underneath it and allows a trouble-free presentation of the installed
hardware. A practical support for graphics cards is also part of the scope
of delivery, because highly-developed pixel accelerators can nowadays often
bring a lot of weight on the scales. In general, the interior offers space
for E-ATX, ATX, Micro ATX and mini ITX motherboards, CPU coolers up to 160 mm
height, graphics cards up to 350 mm length and power supplies up to 200 mm
length.
Cooling and hard disk space
The cooling concept in the IN WIN 303 is anything but
standard. The theory provides that "cool" air is sucked in from
the lower, dust-filter-protected side and blown out again at the top or at the
rear. A maximum of three 120 mm fans are provided on the floor. The
back can accommodate a 120-speed fan or a 120-radiator. The special
feature of the cooling concept is the cover of the power supply unit, because a
maximum of three 120 mm fans or a radiator of up to 360 mm in vertical
alignment can be mounted on the honeycomb structure. The warm air should
therefore be carried past the power supply unit through the side wall of the
housing (also with honeycomb structure) to the outside. The vertical
orientation of the upper cooling components looks really fantastic through the
large side window, however, the fan or radiator must not be more than 70
mm high. In order to allow the user complete freedom in the choice of its
housing cooling, no fans are included.
IN WIN has of course also provided for sufficient disk slots. On the front
of the motherboard tray are two brackets for two 2.5-inch hard drives, which
can optionally be supplemented by a third bracket. In addition, there are
two additional holders for 3.5-inch hard disks on the back of the motherboard
tray. A lack of hard disk soldering is with the IN WIN 303 so ever.
KWD 
AED 
SAR 
BHD 
OMR 
QAR 
