Addlink S92 M.2 2280 PCle Gen4x4 NVMe Internal SSD - 1TB

Brand : Addlink
Quantity :

    • Capacity : 1TB NVMe SSD- Perfect upgrade for your new gaming build *Performance may vary based on system hardware & configuration
    • Speed : Read/Write 4700/1850 MB/s
    • Form Factor : M.2 2280 PCIe 4.0 x4 QLC NAND NVMe SSD
    • Reliability : Supports SMART, TRIM commands, Error Correction Code, Wear Leveling, Bad Block management, Over-Provision, RAID Protection
    • Compatibility : Ready for AMD RYZEN 3rd Gen motherboard X570 & B550, backwards compatible with current PCIe 3.0 platforms

    Addlink S92 M.2 2280 PCle Gen4x4 NVMe Internal SSD - 1TB

    S92 GEN4X4 NVMe

    addlink S92 GEN4x4 NVMe SSD provides extreme storage performance, using Gen4 PCIe technology toachieve blazing fast sequential read speeds of up to 4900MB/s. The S92 is built with next-generation QLC 3D NAND to offer amazing value, great performance and aims at high-end applications, which require constant processing heavy workloads with no system lags or slowdowns of any kind. 

    Lightening speed with 3D QLC NAND

    As a PCIe 4.0 SSD, the S92 delivers incredible storage performance, delivering up to 10 times the sequential read and sequential write speeds of some SATA SSDs and up to 50 times the speed of some traditional HDDs. The S92 is also fully backwards compatible with current PCIe 3.0 platforms

    Lower TCO

    While performance focused, read-centric workloads rely on massive arrays of HDD to deliver the results that users demand, QLC storage does it with fewer drives — lowering your performance-focused total cost of ownership. 

    More Capacity

    QLC stores more bits per cell than its predecessors, enabling immense gains at the system, rack and data center levels that are more cost-effective.

    Smaller Footprint

    QLC technology's ability to increase per-server density reduces rack space by up to 7.7X compared to 2TB HDDs, saving precious and expensive data center real estate.

    Ready for AMD RYZEN 3rd Gen

    The S92 features sustained read/write speeds of up to 4900/3600MB per second, random read/write speed of up to 350K/700K IOPS. Compatible with most motherboards from all the major brands.

    Better endurance, aim at high-end applications

    Experience the unprecedented performance for heavy workloads and engineering applications with the highly reliable S92 SSD, available in high capacity up to 4TB with high endurance up to 800TBW. The S92 boasts a cutting-edge 3D NAND-based architecture that delivers the next-generation performance in a compact M.2 form factor.

    Includes SSD ToolBox Software

    addlink M.2 PCIe SSD Toolbox is a software offer an easy way to analyze and manage your drive. With addlink M.2 SSD Toolbox you will be able to:

    • View drive information exp: general SPEC, firmware version
    • Scan and diagnostic drive Health
    • Check drive identify device command
    • Monitor SMART Status
    • Run secure erase

    Specifications

    • Capacity : 1TB
    • NAND Flash : 3D QLC
    • Dimensions : 80(L)x22(W)x3.5(Max.H) mm, 8.2g
    • Interface : NVMe 1.3 PCIe GEN4x4
    • Form Factor : M.2 2280
    • Seq. Read/Write (MB/s) : 4700/1850
    • Operating Temp. : 0°C ~ 70°C
    • Storage Temp. : -40°C ~ 85°C
    • MTBF : 1.8Million hours
    • Support Functions : TRIMM DEVSLP, Garbage Collection, ECC, S.M.A.R.T, SLC Caching, Wear Leveling, Bad Block management, Over-Provision, RAID Protection
    • Operating System : Microsoft Windows 7 (additional driver required) Microsoft Windows 8 (additional driver required) Microsoft Windows 10, Linux Kernel 2.6.31 or later