Gigabyte Z590M (rev. 1.0) Micro ATX Motherboard

• 11th Generation Intel® Coreâ„¢ i9 processors / Intel® Coreâ„¢ i7 processors / Intel® Coreâ„¢ i5 processors

• 10th Generation Intel® Coreâ„¢ i9 processors / Intel® Coreâ„¢ i7 processors / Intel® Coreâ„¢ i5 processors / Intel® Coreâ„¢ i3 processors/ Intel® Pentium® processors / Intel® Celeron® processors*

• * Limited to processors with 4 MB Intel® Smart Cache, Intel® Celeron® G5xx5 family.

• L3 cache varies with CPU

• (Please refer to "CPU Support List" for more information.)

• Intel® Z590 Express Chipset

• 11th Generation Intel® Coreâ„¢ i9/i7/i5 processors:

• Support for DDR4 5333(O.C.) / DDR4 5133(O.C.) / DDR4 5000(O.C.) / 4933(O.C.) / 4800(O.C.) / 4700(O.C.) / 4600(O.C.) / 4500(O.C.) / 4400(O.C.) / 4300(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200 / 3000 / 2933 / 2800 / 2666 / 2400 / 2133 MHz

• 10th Generation Intel® Coreâ„¢ i9/i7 processors:

• Support for DDR4 2933/2666/2400/2133 MHz memory modules

• 10th Generation Intel® Coreâ„¢ i5/i3/Pentium®/Celeron® processors:

• Support for DDR4 2666/2400/2133 MHz memory modules

• 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory

• Dual channel memory architecture

• Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

• Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

• Support for Extreme Memory Profile (XMP) memory modules

• (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

Onboard Graphics

• Integrated Graphics Processor-Intel® HD Graphics support:

• 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz

• * The DVI-D port does not support D-Sub connection by adapter.

• 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz

• * Support for HDMI 1.4 version and HDCP 2.3.

• 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz

• * Support for DisplayPort 1.2 version and HDCP 2.3

• (Graphics specifications may vary depending on CPU support.)

• Support for up to 3 displays at the same time

• Realtek® Audio CODEC

• High Definition Audio

• 2/4/5.1/7.1-channel

• * To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first. Please visit GIGABYTE's website for details on configuring the audio software.

• Support for S/PDIF Out

• Intel® GbE LAN chip (1000 Mbit/100 Mbit)

• 1 x PCI Express x16 slot, running at x16 (PCIEX16)

• * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

• (The PCIEX16 slot conforms to PCI Express 4.0 standard.)(Note)

• 1 x PCI Express x16 slot, running at x4 (PCIEX4)

• 1 x PCI Express x1 slot

• (The PCIEX4 and PCIEX1 slots conform to PCI Express 3.0 standard.)

• Support for AMD Quad-GPU CrossFireâ„¢ and 2-Way AMD CrossFireâ„¢ technologies

• 1 x M.2 connector (Socket 3, M key, type 2260/2280 PCIe 4.0 x4/x2 SSD support) (M2P_CPU)(Note)

• 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) (M2A_SB)

• 6 x SATA 6Gb/s connectors

• Support for RAID 0, RAID 1, RAID 5, and RAID 10

• * Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors.

• Intel® Optaneâ„¢ Memory Ready

• Chipset:

• 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 1 support

• 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel

• 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)

• 4 x USB 2.0/1.1 ports available through the internal USB headers

• 1 x 24-pin ATX main power connector

• 1 x 8-pin ATX 12V power connector

• 1 x CPU fan header

• 3 x system fan headers

• 2 x addressable LED strip headers

• 2 x RGB LED strip headers

• 6 x SATA 6Gb/s connectors

• 2 x M.2 Socket 3 connectors

• 1 x front panel header

• 1 x front panel audio header

• 1 x S/PDIF Out header

• 1 x USB 3.2 Gen 1 header

• 2 x USB 2.0/1.1 headers

• 2 x Thunderboltâ„¢ add-in card connectors

• 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)

• 1 x serial port header

• 1 x Clear CMOS jumper

• 1 x Q-Flash Plus button

• ＊All fan headers are subject to support AIO_Pump, Pump and high performance fan with the capability of delivering up to 2A/12V @ 24W.

• 1 x PS/2 keyboard/mouse port

• 1 x USB Type-C® port, with USB 3.2 Gen 1 support

• 1 x USB 3.2 Gen 2 Type-A port (red)

• 4 x USB 3.2 Gen 1 ports

• 1 x DVI-D port

• 1 x DisplayPort

• 1 x HDMI port

• 1 x RJ-45 port

• 3 x audio jacks

I/O Controller

• iTE® I/O Controller Chip

• H/W Monitoring

• Voltage detection

• Temperature detection

• Fan speed detection

• Fan fail warning

• Fan speed control

• * Whether the fan speed control function is supported will depend on the fan you install.

• 1 x 256 Mbit flash

• Use of licensed AMI UEFI BIOS

• PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

• Support for APP Center

• * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.

• @BIOS

• EasyTune

• Fast Boot

• Game Boost

• ON/OFF Charge

• RGB Fusion

• Smart Backup

• System Information Viewer

• Support for Q-Flash Plus

• Support for Q-Flash

• Support for Xpress Install

• Norton® Internet Security (OEM version)

• cFosSpeed

• Support for Windows 10 64-bit

• Micro ATX Form Factor; 24.4cm x 24.4cm

• Supported by 11th Generation processors only.

Remark

• Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.

• Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website.