GIGABYTE X670 GAMING X AX V2 (rev. 1.0) DDR5 ATX Motherboard - Black

slider_1
slider_1
slider_1
slider_1
Brand : Gigabyte
Quantity :

    • AMD Socket AM5：Supports AMD Ryzen™ 7000 Series / Ryzen™ 8000 Series Processors

    • Unparalleled Performance：Twin 14*+2+2 Phases Digital VRM Solution

    • Dual Channel DDR5：4*SMD DIMMs with AMD EXPO™ & Intel® XMP Memory Module Support

    • Next Generation Storage：1*PCIe 5.0 x4 and 3*PCIe 4.0 x4 M.2 Connectors

    • Mega-Heatpipe & M.2 Thermal Guard：To Ensure VRM Power Stability & 25110 PCIe 5.0 M.2 SSD Performance

    • EZ-Latch：PCIe x16 Slot & M.2 Connectors with Quick Release & Screwless Design

    • Fast Networks：2.5GbE LAN & Wi-Fi 6E 802.11ax

    • Extended Connectivity：HDMI, Dual USB-C® 20Gbps and Upcoming GIGABYTE USB4 AIC Support

    • Smart Fan 6：Features Multiple Temperature Sensors, Hybrid Fan Headers with FAN STOP

    • Q-Flash Plus：Update BIOS Without Installing the CPU, Memory and Graphics Card

    * 7+7 phases parallel power design

    GIGABYTE X670 GAMING X AX V2 (rev. 1.0) DDR5 ATX Motherboard - Black

    Durable Performance

    GIGABYTE Ultra Durable™ motherboards built with optimal components inside out provide the prime performance and timeless platform.

    Digital VRM Design

    14+2+2 Phases Digital VRM Solution

    EXPO & XMP Support

    DDR5 EXPO & XMP Overclocking Up to 8000 and Beyond*

    Thermal

    Fully Covered MOSFET Heatsink

    Future Connectivity

    The ultimate connectivity with blazing data-transfer speeds through the next generation network and storage.

    802.11ax Wi-Fi 6E with GIGABYTE Ultra-high Gain Antenna

    The latest Wireless solution 802.11ax Wi-Fi 6E with new dedicated 6GHz band, enables gigabit wireless performance, provides smooth video streaming, better gaming experience, few dropped connections and speeds up to 2.4Gbps. Moreover, Bluetooth 5 provides 4X range over BT 4.2 and with faster transmission.

    2.5GbE LAN

    Supercharge your gaming with 2.5GbE LAN Achieve lightning-fast speeds, minimal lag, and unbeatable performance to elevate your gaming setup and dominate the competition.

    PCIe 5.0/ 4.0 Hardware Design

    GIGABYTE X670 Motherboards are ready to work with the PCIe 5.0/ 4.0 devices which are expected to experience 4 times bandwidth than the current PCIe 3.0 devices. To reach the high speed and maintain good signal integrity, GIGABYTE R&D uses the low impedance PCB to provide the maximum performance.

    Hi-Fi Audio

    High-End Audio Capacitors

    GIGABYTE motherboards use high-end audio capacitors. These high quality capacitors help deliver high resolution and high fidelity audio to provide the most realistic sound effects for gamers.

    Audio Noise Guard

    GIGABYTE motherboards feature an audio noise guard that essentially separates the board’s sensitive analog audio components from potential noise pollution at the PCB level.

    Easy Friendly

    Innovative and intuitive hardware, software, and BIOS interface design to create your personal style.

    PCIe EZ-Latch

    Unlock the latch of the PCIe slot easily when remove the graphics card in the PCIe slot.

    M.2 EZ-Latch

    Attach and remove your M.2 module with ease.

    Q-Flash Plus

    Update the BIOS easily without installing the CPU, memory and graphics card. With GIGABYTE Q-Flash Plus, you don't need to install the CPU, memory and graphics card nor enter the BIOS menu to flash the BIOS. Just download and save a new BIOS file (rename to gigabyte.bin) on the USB flash drive, then press the dedicated Q-Flash Plus button and you’re good to go!

    • STEP 1: Plug 24pin & 8pin power supply cable on motherboard

    • STEP 2: Download motherboard BIOS file and rename to ""gigabyte.bin"", save to USB flashdrive, and plug USB flashdrive into Q-Flash USB port

    • STEP 3: Press Q-Flash Plus button, and motherboard will start updating BIOS automatically.

    Smart Fan 6

    Smart Fan 6 contains several unique cooling features that ensure gaming PC maintain its performance while staying cool and quiet. Multiple fan headers can support PWM/DC fan and pump, and users can easily define each fan curve based on different temperature sensors across the board via intuitive user interface.

    Cooling Features

    • High Current Support: Each fan headers support PWM and DC fan and Water Cooling Pump , and up to 24W (12V x 2A) with Over-Current Protection

    • Precision Control: Multiple temperature/fan speed control points for precise fan curve

    • Dual Curve Mode: Slope/Stair dual mode for different user scenario

    • Fan Stop: Fan can stop completely below users' specified temperature point

    Smart Fan 6 BIOS UI

    1. Improve fan curve UI: We increase control points from 5 to 7 and larger fan speed graph for precise and easier fan curve control.

    2. Slope/Stair dual graph mode: Fan curve can be quickly switch with Slope and Stair modes for different user scenario. Slope is traditional and intuitive linear fan speed curve. With newly added Stair non-linear mode, fan keeps at same speed between specified temperature interval.

    3. Manual Input: For advanced users, we provide fan speed manual input for more precise control.

    4. EZ Tuning: Use can place 4 EZ Tuning points at rough temperature/fan speed, and Smart Fan 6 can quickly generate a fan curve.

    5. Fan curve profile: Fan curve profile can be saved in BIOS ROM, profile will be kept after updating BIOS.

    GIGABYTE Control Center

    a unified software platform across a variety of GIGABYTE products.

    RGB Fusion

    customize the RGB lighting on the motherboard or devices that connect to it.

    Specifications

    • CPU

      1. AMD Socket AM5, support for: AMD Ryzen™ 7000 / Ryzen™ 8000 Series Processors

      (Please refer "CPU Support List" for more information.)

    • Chipset

      1. AMD X670

    • Memory

      1. Support for DDR5 8000(OC)/ 7800(OC)/ 7600(OC)/ 7200(OC)/ 7000(OC)/ 6800(OC)/ 6600(OC)/ 6400(OC)/6200(OC)/6000(OC)/5600(OC)/5200/4800/4400 MT/s memory modules

      2. 4 x DDR5 DIMM sockets supporting up to 192 GB (48 GB single DIMM capacity) of system memory

      3. Dual channel memory architecture

      4. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

      5. Support for AMD EXtended Profiles for Overclocking (AMD EXPO™) and Extreme Memory Profile (XMP) memory modules

      (The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to "Memory Support List" for more information.)

    • Onboard Graphics

      Integrated Graphics Processor:

      1. 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz

        * Support for HDMI 2.1 version and HDCP 2.3.

        ** Support native HDMI 2.1 TMDS compatible ports.

      (Graphics specifications may vary depending on CPU support.)

    • Audio

      1. Realtek® Audio CODEC

      2. High Definition Audio

      3. 2/4/5.1/7.1-channel

        * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.

    • LAN

      1. Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)

    • Wireless Communication module

      Realtek® Wi-Fi 6E RTL8852CE

      1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands

      2. BLUETOOTH 5.3

      3. Support for 11ax 160MHz wireless standard

      (Actual data rate may vary depending on environment and equipment.)

    • Expansion Slots

      1 x PCI Express x16 slot (PCIEX16), integrated in the CPU:

      1. AMD Ryzen™ 7000 Series Processors support PCIe 4.0 x16 mode

      2. AMD Ryzen™ 8000 Series-Phoenix 1 Processors support PCIe 4.0 x8 mode

      3. AMD Ryzen™ 8000 Series-Phoenix 2 Processors support PCIe 4.0 x4 mode

        * The PCIEX16 slot can only support a graphics card or an NVMe SSD. If only one graphics card is to be installed, be sure to install it in the PCIEX16 slot.

      Chipset:

      1. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4)

      2. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x2 (PCIEX2)

    • Storage Interface

      1 x M.2 connector (M2A_CPU), integrated in the CPU, supporting Socket 3, M key, type 25110/2580 SSDs:

      1. AMD Ryzen™ 7000 Series Processors support PCIe 5.0 x4/x2 SSDs

      2. AMD Ryzen™ 8000 Series-Phoenix 1/Phoenix 2 Processors support PCIe 4.0 x4/x2 SSDs

      1 x M.2 connector (M2B_CPU), integrated in the CPU, supporting Socket 3, M key, type 22110/2280 SSDs:

      1. AMD Ryzen™ 7000 Series Processors support PCIe 4.0 x4/x2 SSDs

      2. AMD Ryzen™ 8000 Series-Phoenix 1 Processors support PCIe 4.0 x4/x2 SSDs

      3. AMD Ryzen™ 8000 Series-Phoenix 2 Processors support PCIe 4.0 x2 SSDs

      Chipset:

      1. 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2C_SB, M2D_SB)

      2. 4 x SATA 6Gb/s connectors

      RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices

      RAID 0, RAID 1, and RAID 10 support for SATA storage devices

    • USB

      CPU:

      1. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

      2. 2 x USB 3.2 Gen 1 ports on the back panel

      CPU + USB 2.0 Hub:

      1. 4 x USB 2.0/1.1 ports on the back panel

      Chipset:

      1. 2 x USB Type-C® ports, with USB 3.2 Gen 2x2 support (1 port on the back panel, 1 port available through the internal USB header)

      2. 8 x USB 3.2 Gen 1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

      3. 4 x USB 2.0/1.1 ports available through the internal USB headers

    • Internal I/O Connectors

      1. 1 x 24-pin ATX main power connector

      2. 2 x 8-pin ATX 12V power connectors

      3. 1 x CPU fan header

      4. 1 x CPU fan/water cooling pump header

      5. 3 x system fan headers

      6. 3 x addressable RGB Gen2 LED strip headers

      7. 1 x RGB LED strip header

      8. 4 x SATA 6Gb/s connectors

      9. 4 x M.2 Socket 3 connectors

      10. 1 x front panel header

      11. 1 x front panel audio header

      12. 1 x USB Type-C® header, with USB 3.2 Gen 2x2 support

      13. 2 x USB 3.2 Gen 1 headers

      14. 2 x USB 2.0/1.1 headers

      15. 1 x THB_U4 add-in card connector

      16. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/ GC-TPM2.0 SPI V2 module only)

      17. 1 x power button

      18. 1 x reset button

      19. 1 x Clear CMOS button

      20. 1 x reset jumper

      21. 1 x Clear CMOS jumper

    • Back Panel Connectors

      1. 1 x Q-Flash Plus button

      2. 2 x SMA antenna connectors (2T2R)

      3. 1 x HDMI port

      4. 6 x USB 3.2 Gen 1 ports

      5. 4 x USB 2.0/1.1 ports

      6. 2 x USB 3.2 Gen 2 Type-A ports (red)

      7. 1 x USB Type-C® port, with USB 3.2 Gen 2x2 support

      8. 1 x RJ-45 port

      9. 3 x audio jacks

    • I/O Controller

      1. iTE® I/O Controller Chip

    • H/W Monitoring

      1. Voltage detection

      2. Temperature detection

      3. Fan speed detection

      4. Water cooling flow rate detection

      5. Fan fail warning

      6. Fan speed control

        * Whether the fan speed control function is supported will depend on the fan you install.

    • BIOS

      1. 1 x 256 Mbit flash

      2. Use of licensed AMI UEFI BIOS

      3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

    • Unique Features

      1. Support for GIGABYTE Control Center (GCC)

        * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.

      2. Support for Q-Flash

      3. Support for Q-Flash Plus

      4. Support for Smart Backup

    • Bundled Software

      1. Norton® Internet Security (OEM version)

      2. LAN bandwidth management software

    • Operating System

      1. Support for Windows 11 64-bit

      2. Support for Windows 10 64-bit

    • Form Factor

      1. ATX Form Factor; 30.5cm x 24.4cm

Recomended items